Wiki.Cyli.Org

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

==== Bluetooth Join CLI ====
Put the keyboard into pair mode (k380 you would hold the bt key you want to assign the device too)
At pi console, run;
<code>
bluetoothctl
power on
agent on
pair 0C:4D:12:11:01:E4
# Typethe pair code into the keyboard as prompted
connect 0C:4D:12:11:01:E4
trust 0C:4D:12:11:01:E4
agent off
quit
</code>
Hopefully you should have a bt keyboard connected. you may have to do additional work to ensure the BT will power on and pair on restart of the device.
You must enable the agent so that keyboard can do the pair code thingy. Some keyboards may vary.

Archived from [[https://superuser.com/questions/1160934/bluetoothctl-connects-and-disconnects-repeatedly?fbclid=IwZXh0bgNhZW0CMTAAAR2vUFIQdsEtcg91hR6xopD2P7hJuBy8I3J9hiFpXSKLJka8hScgq11Zuz4_aem_ZmFrZWR1bW15MTZieXRlcw|Superuser.com]]