Differences

This shows you the differences between two versions of the page.

--- set_up_keychron_c3_pro_rgb_keyboard [2024/07/25 18:55] – steve
+++ set_up_keychron_c3_pro_rgb_keyboard [2024/07/25 18:55] (current) – steve
@@ Line 2: / Line 2: @@
 This is a short howto on setting up a Keychron C3 Pro RGB in Linux. You'll need sudo rights, but that's about all.
-**Unfortunately**, I needed to use a Windows machine to upgrade my firmware first, using the instructions at [[https://launcher.keychron.com/#/keymap|launcher.keychron.com]], but I believe current models are shipping with the newer firmware pre-installed (c3_pro_ansi_rgb_v1.0.1_2403081755). If not, you can downloa the .bin file {{ :c3_pro_ansi_rgb_v1.0.1_2403081755.bin.zip |here}}.
+**Unfortunately**, I needed to use a Windows machine to upgrade my firmware first, using the instructions at [[https://launcher.keychron.com/#/keymap|launcher.keychron.com]], but I believe current models are shipping with the newer firmware pre-installed (c3_pro_ansi_rgb_v1.0.1_2403081755). If not, you can download the .bin file {{ :c3_pro_ansi_rgb_v1.0.1_2403081755.bin.zip |here}}.
 <code bash>
 # First, you need to know what groups you're currently